The Doepfer Module A-128 (Fixed Filter Bank) is a filter bank,
made up of 15 parallel band pass filters :50 Hz / 75Hz / 110Hz / 150Hz / 220Hz / 350Hz / 500Hz / 750Hz / 1.1kHz / 1.6kHz / 2.2kHz /
3.6kHz / 5.2kHz / 7.5kHz / 11 kHz.
Each band pass filter has its own amplitude control knob.
The unmodified 128 has just one output which is a mix of all the filters, depending on the
position of each one's amplitude control knob.
It's a lovely sounding filter even though it has no CV control.
It's worth adding an output for each filter.
To do this you must remove the knobs aND faceplate
Ive made a breakout panel .. 4HP
You can find some mod instructions on Doepfers own site:
http://www.doepfer.de/service/A128_single_outputs.pdf
-----------------------------------------------------------------------------------------------
For more Euro DIY builds click here:
http://djjondent.blogspot.com.au/2017/12/diy-index.html
-------------------------------------------------------------------------------------------------
Sunday, 8 July 2018
The Presets - Waves, Wollongong.
One of my fav bands.
The Presets are an Australian electronic music duo of Julian Hamilton and Kim Moyes. Formed in 2003.
It was a great live show. They played on Fri 22 June @ Waves, Wollongong.
They have been quiet of late so its great to see them on the road again with a new album. Hi Viz.
The Presets are an Australian electronic music duo of Julian Hamilton and Kim Moyes. Formed in 2003.
It was a great live show. They played on Fri 22 June @ Waves, Wollongong.
They have been quiet of late so its great to see them on the road again with a new album. Hi Viz.
Autechre - Sydney 2018
Held at Max Watts, June 20, Sydney.
The English electronic duo is made up of Rob Brown and Sean Booth.
Autechre were conceived in 1987 in Rochdale, Greater Manchester..
The band have released 12 studio albums, and are planning to release NTS Sessions 1-4 later this year.
The English electronic duo is made up of Rob Brown and Sean Booth.
Autechre were conceived in 1987 in Rochdale, Greater Manchester..
The band have released 12 studio albums, and are planning to release NTS Sessions 1-4 later this year.
This concert was performed in complete darkness.
Deluge - Synthstrom Audible
Thanks to Ian from Synthstrom ( and the organisers of New Sound Waves) for this live demo.
Held in Sydney
I'm very tempted to purchase a Deluge.
Ian also brought along one of the early existing Deluges.
It's interesting to see how it it has developed into the current beast.
The Deluge was developed in New Zealand
It's a drum machine, a synth. It integrates with Midi and voltage controlled synths.
Testing the Deluge with some eurorack gear (Metromodular).
Held in Sydney
I'm very tempted to purchase a Deluge.
Some pics:
Ian also brought along one of the early existing Deluges.
It's interesting to see how it it has developed into the current beast.
The Deluge was developed in New Zealand
It's a drum machine, a synth. It integrates with Midi and voltage controlled synths.
Testing the Deluge with some eurorack gear (Metromodular).
Friday, 6 July 2018
Santa Clara - Cuba
This is the capital of the province of Villa Cara.
Its full of revolution landmarks and is the final tomb of Che Guevara.
The Che Guevara Mausoleum. The bronze statue is 22 feet high.
iT'S located in "Plaza Che Guevara" (Che Guevara Square) & houses the remains of the revolutionary Ernesto "Che" Guevara and twenty-nine of his fellow combatants killed in 1967 during Guevara's attempt to spur an armed uprising in Bolivia.
Che was burried here in 1997, after his remains where found in Bolivia.
Santa Clara was chosen as the site for his tomb because the city was the location of the decisive Cuban battle of Dec 31, 1958 that ended with Cuban dictator Fulgencio Batista fleeing into exile.
Apart from the tomb, there is a museum to see. No photos were allowed.
Regardless of one's views, this is a facinating place of how one man changed the course of world history.
His legacy, reverberates to this day.
You can find in another part of the city, the Fulgencio Batista military supply train which was derailed by Guevara during the battle for Santa Clara. Light was fading so sorry for the poor photos. My understanding was that the remains are in its original location.
Its full of revolution landmarks and is the final tomb of Che Guevara.
The Che Guevara Mausoleum. The bronze statue is 22 feet high.
iT'S located in "Plaza Che Guevara" (Che Guevara Square) & houses the remains of the revolutionary Ernesto "Che" Guevara and twenty-nine of his fellow combatants killed in 1967 during Guevara's attempt to spur an armed uprising in Bolivia.
Che was burried here in 1997, after his remains where found in Bolivia.
Santa Clara was chosen as the site for his tomb because the city was the location of the decisive Cuban battle of Dec 31, 1958 that ended with Cuban dictator Fulgencio Batista fleeing into exile.
Apart from the tomb, there is a museum to see. No photos were allowed.
Regardless of one's views, this is a facinating place of how one man changed the course of world history.
His legacy, reverberates to this day.
You can find in another part of the city, the Fulgencio Batista military supply train which was derailed by Guevara during the battle for Santa Clara. Light was fading so sorry for the poor photos. My understanding was that the remains are in its original location.
jAN 1, 1959
----------------------------------------------------------------------------------------------------------
For more Travel Postcards Click Here
For more on Cuba Click Here
Eloquencer - Copy A Track To Another Track In A Different Pattern
Copy A Track To Another Track In A Different Pattern
We are in edit mode (CV, GATE, GATE LEN, RATCHET) and we have chosen the track we want to copy.
1. Copy (press Function + Copy and hold)
The OLED will display "Trak Copy"
2. (While holding) deselect the parameters you don’t want to copy by pressing the relevant green lit edit
mode buttons
3. Release Function + Copy
4. Go to Pattern Mode (hold Function + Pattern for at least ½ second)
5. Choose the desired Bank and Pattern (via the Track then Step buttons)
6. Go to any of the editing modes (CV, Gate, Gate Length, Ratcheting)
7. Select the desired track you want to paste the track to
8. Paste (Function + Paste for at least ½)
Tuesday, 3 July 2018
Eloquencer - creating parts.
In the Eloquencer, you create parts by joining patterns.
You join Parts to make songs.
The manual says that a song can have a potential max of 256 linked parts.
(Some of these parts would be repeated as you can only save 64 unique parts into
the memory of each project).
To make Parts
1. Go to Song Mode
Function & Song (Long Press).
You will see displayed this on the OLED
2. Scroll down to Create Parts.
3. press the encoder
4. We have 4 banks of 16 patterns to choose from.
You will see this on the OLED
A1 is your first Part.
You can create 4 banks of 16 parts -- 64 parts
The parts are labelled
A1 - A16, B1 to B16, C1-c16, D1-D16.
5. Part length
This changes every time you add a pattern.
6. Press Start
You will see the patterns that are available displayed
as lit step buttons
A1 - A16, B1 to B16, C1-c16, D1-D16.
You can select any of the 4 banks
7. Add your patterns by pressing the step buttons.
You will see the part length go up each time.
8. When you are done press Finish.
---------------------
To play a part return to SONG Mode.
If you wish to return to PATTERN mode to edit patterns, you must turn OFF song mode.
You do this while in Song Mode
Subscribe to:
Posts (Atom)














..




