Monday, 5 November 2018

LZX - Castle -Modular synth

Some notes before I begin building The Castle.


The Castle synth is different from the Cadet synth which I have recently been putting together.
These modules were designed by  Philip Baljeu of Toronto and were inspired by early digital hardware video synths.
The main difference seems to be that the castle is a system of binary & logic modules.
Binary = on/off or 0/1
It processes 3 bits in parallel....  3 bit data streams
The 3-bits give 8 possible combinations.....Black, Red, Green, Yellow, Blue, Magenta, Cyan, and White.

I'm guessing that these modules will be good for producing computer graphics and pixels ??... but maybe more. I wonder what it will be like when you mix these with the analog Cadet LZX.
It seems that any signal can be used as an input, it doesn't need to be binary logic signals. 
There are 8 modules in this video synthesizer. Everything is through hole, and 4HP

LZX - Castle
Introduction
00_000 ADC - Analog to digital converter
01_001 DAC - Digital to Analog converter
02_010 Clock VCO
03_011 Shift Register
04_100 Multi Gate
05_101 Quad Gate
06_110 Counter
07_111 Flip flops



---------------------------

Click here to access the Video Index page


Saturday, 3 November 2018

Modular in the Lounge V

Yah. Sat 2nd November
Modular in the Lounge V is here.
 The day began with the best scampi ever.

The night was all modular. Thanks to Paul, Dee, Adam, Ben, Terry & Andrew for some
 some great stuff.

Allinaire

The 5th Modular in the Lounge.

RENE mark II

Ben




Post Global Disorder
..


VirusInstaller - 1st performance


Adam








Virus Installer --- 2nd performance



Past Modular on the Lounge gigs:
+ Modular in the lounge IV
+ Modular in the lounge III
+ Modular in the lounge II
+ Modular in the lounge I
+ Modular in the Car Park

History of Buchla, Eurorack formats & the origins of names.

This post was inspired by a discussion with my friend Adam over the confusion of naming Buchla modules. I have 2 vintage Buchla systems along with what many refer to as "Buchla Clones"

and lots of 3rd party 4U modules which make no attempt to pass themselves off as Buchla apart from the fact that they are 4U and share the same voltage specs.

I love all these modules. ... for different reasons and am happy to use vintage alongside modern modules.
This format has been steadily growing over the years and I think this momentum will only gather pace.

Should they all be called Buchla ????
How do we make the distinction between vintage Buchla modules, their "clones", and modern manufacturers who use the format invented by Don Buchla?
I have recently started describing only vintage Buchla modules as Buchla, and the rest as "Buchla Format". Is this distinction good enough? Should the word Buchla only be used with modules that Don Buchla himself made or commissioned?
I think making this distinction is important to avoid confusion for musicians and their audiences.

Adam & I decided to compare this format to Eurorack.
 Original photo by Nina Richards


The Eurorack system was originally specified in 1996 by Doepfer Musikelektronik, but history could so easily have gone another direction.

Doepfer Musikelektronik GmbH is based in Gräfelfing, Germany and was founded by Dieter Döpfer.
Dieter developed a voice modular system in the early 1980s (the VMS) but with the advent of MIDI in 1983 & the release of the Yamaha DX7 again in 1983, it seemed that the world of the modular synthesizer was over.
In 1992 Doepfer developed the MAQ16/3 Sequencer which was heavily influenced by Kraftwerk.
He developed the Mogli Midi Glove and the MIDI-to-SYNC interface MSY1 in 1994.
Around this time second-hand Roland TB303s began to inflate in price and Dieter decided to develop a
 TB 303 inspired synth... the MS 404. 1995 was a big year. The MS404 was a huge success. It was a 1U rack mounted synth.
After this success, Dieter decided to try to develop a new modular system and by Autumn of 1996 he released the A-100 system. " The first A-100 modules were nothing more than circuits from the MS-404". (DD)

It had only 10 modules at the time. It's part of the history of Eurorack now.
I understand that the Eurorack name originated from the computer Eurocard systems which were developed by Acorn computers between 1979 to 1982.

This decision to use a standard 19" rackmount enclosure was critical.

 It looks very much like the modern Eurorack modular synth system of today.

At the time there were other manufacturers like Analogue Systems (AS) that used a similar rack system. AS had small technical differences such as the power connectors but they later adapted some of  their products to offer "Eurorack compatibility".
Over time more and more manufacturers adopted this system.

The module height was three rack units and the width varied depending on the specific module
Width was measured in the Eurocard-specific Horizontal Pitch standard. Here 1HP = 0.2 inches, or 5.08 mm. 

 This 3U system is now the largest format with hundreds of manufacturers from all over the world. What makes it so popular I think is it's open source nature.
 The A-111 is a doepfer module. It sits happily along side two US manufacturers.

There is of course strict adherence to the format size/and voltage specs, but manufacturers are free to
name their modules what they like, using their own distinctive panel designs and names.
These module manufacturers are fortunate to have the name "Eurorack" to use. It's a generic title.

Is there a generic name that could be applied to all modules using the format invented by Don Buchla?  BF (for Buchlaformat)?, 4U? , 4UB maybe?
I don't think 4U is sufficient as there are other module manufacturers using the 4U size.
4URack ?
4rack?


Links:
+ What U is that synth?
+ Eurorack - Wikipedia
+ Doepfer - wikipedia
+ Eurocard -wiki
+ Doepfer time line History

Egypt - Mt Sinai

This mountain  is in the Sinai Peninsula of Egypt.
It's speculated that it is a the location of the biblical Mount Sinai.


Well worth a visit even if you are not interested in its religious significance.

Decided to hike to the summit for the morning sunrise.
The hike started at 4am. Very cold ,

mADE some friends on the way.
Ah the trusty packet of Tim Tams. :-)
I never leave Australia without at least one packet in my backpack.
They are a hit everywhere I go.
Mount Sinai is mentioned many times in the Book of Exodus and other books of the Bible, and the Quran. According to Jewish, Christian, and Islamic tradition, the biblical Mount Sinai was the place where Moses received the Ten Commandments. 

However, the earliest Christian traditions place this event at the nearby Mount Serbal, at the foot of which a monastery was founded in the 4th century.
 Mount Sinai is a 2,285-metre (7,497 ft) .... A moderately high mountain to climb but not too steep.

 This is a Greek Orthodox Chapel. It was closed.
The chapel was constructed in 1934 on the ruins of a 16th-century church.

 tHE SUMMIT  at last.


The building above is a mosque.

Waiting for the sunrise.

Cold !!! up there.





 
tHE hike back down


















 St Catherines Monastery.
The monastery is Greek Orthodox and is a UNESCO World Heritage Site. According to the UNESCO , this monastery is the oldest working Christian monastery in the world – although the Monastery of Saint Anthony, situated across the Red Sea in the desert south of Cairo, also lays claim to that title.(Wikipedia)

Sadly it was also closed so couldn't explore inside.

----------------------------------------------------------------------------------------