Deluge effects - filters & EQ

You can apply effects at the
1. Clip level (Kit & Synth level)
2. Song Level

Effects are available via the grid  shortcuts Or using the select knob

The Total Effects available include:
Volume, panning, HPF, LPF, Envelopes, Saturation , Decimation, Bitcrushing, Modulation (Mod FX)
EQ, Reverb, Delay, Stutter.

Synth Level
Osc type, Oscillator Volume,  HPF, LPF, Amplitude Envelopes, Saturation , Decimation, Bitcrushing, Modulation (Mod FX)
EQ, Reverb, Delay.

Kit Level
Volume, HPF, LPF, Decimation, Bitcrushing, Modulation (Mod FX)
EQ, Reverb, Delay.


Song Level
Modulation (Mod FX)
EQ, Reverb, Delay.Volume, Reverb,
HPF, LPF, Decimation, Bitcrushing,
Stutter


---------------------------------------
Filters
The deluge has 2 filters HP & LP

To access the filters:
1. Enter Clip view
2. Shift
3. Press the relevant shortcut pad
4. Turn the select knob.

There are just 6 button/effects, three for each filter
As of Version 3, the HPF slope doesn't work .. maybe a later revision ?

The short cuts work in clip mode, but don't seem to work in song mode.

----------------------------------------------------------

EQ - Equalizer

 

There are 2 ways to adjust EQ
a. The short cut pads.
b. the [CUTOFF / RES] affect button & upper gold knob

Short Cut pads
Just 4 buttons for bass & Treble. (nothing for mids)

BASS
AMOUNT: 0-50. 25 is central, > 25 to boost, < 25 to cut.
FREQUENCY: 0-50 Position to boost / cut across the bass range.

Treble
AMOUNT: 0-50. 25 is central, > 25 to boost, < 25 to cut.
FREQUENCY: 0-50 Position to boost / cut across the treble range.

To access the Eq:
1. Enter Clip view
2. Shift
3. Press the relevant shortcut pad
4. Turn the select knob.

The short cuts work in clip mode, but don't seem to work in song mode.

 [CUTOFF / RES] affect button & upper gold knob

1. Enter Clip view
2. Press [CUTOFF / RES] affect button
3. Press UPPER gold knob to cycle between LPF, HPF & EQ
4. select EQ by releasing the control.
5. Turn (UPPER) to change TREBLE band amount or turn (LOWER) to
    change BASS band amount for the sound selected.

Note:
You can effect individual notes or the whole kit
Press [AFFECT ENTIRE] to affect the entire kit.
Turn (UPPER) to change TREBLE band amount or turn (LOWER) to
change BASS band amount for the entire kit selected.

------------------------------------------------