Some personal notes of syncing the ARP2500 with external gear.
I'm using the ARP2500 sequencer as the master clock.... the 1027 module
It's sending a clock into the 0-control clock input
The clock out from the 0-control goes into
the AE modular
Its the orange cable ... into the 4 I/O.
The 4 I/O is a great & safe way to input/output external audio and Cv
Importantly, the sockets have overvoltage protection
(as AE modular is limited to 5V).
They can be switched between audio and DC/CV signals.
The output from the 4 I/O is driving the trigger sequencer
TRIQ164
Finally, CV and gates/envelopes from the 0-control enter the AE modular via the Master I/O
I'm not sure if the input/output is voltage protected.
Though seems to work without any probs ....but if you're worried
the external voltages might be too high, its better to use the 4 I/O
and keep things below the 5V level.
No comments:
Post a Comment