A brief video of the ELKLIK module used in a standard eurorack case.
The pressure points channel a into input 1, channel b into input 2 of Elklik.
Mainly used in the above video as a voltage controlled switch..
The filter has a LP and HP out. The Elklik is randomly switching between LP and HP.
You can also use the module as a kind of clock.
Plug + 5v into one input.
Just trigger the relay on/off.
The common out provides the clock out.
The out is basically a pulse wave that jumps between 0v and +5v
So the noise is causing the Elklik to jump randomly between the top and bottom sequencer rows
This module is part of a kickstarter campaign.
No comments:
Post a Comment