Vertical range should be set to zero. (there is a switch at this position).
Set the Meter mode switch to CONTROL VOLTAGE.
The sequence length can be shortened or lengthened using this dial.
;;;
JonDent - Explorations in Electronics, Electronic Music, Coffee, Sci Fi, Art & Travel (but mostly electronic music)
Wednesday, 11 May 2016
EMS Synthi - 2. Using the KS for the first time.
Some quick notes to help use the keyboard sequencer for the first time.
To use the sequencer patch D3 & A12 (as before), but place the pitch pin at I16
Turn the envelope shaper to sequencer.
Vertical range should be set to zero. (there is a switch at this position).
Set the Meter mode switch to CONTROL VOLTAGE.
The sequence length can be shortened or lengthened using this dial.
;;;
;;;;;
Vertical range should be set to zero. (there is a switch at this position).
Set the Meter mode switch to CONTROL VOLTAGE.
The sequence length can be shortened or lengthened using this dial.
;;;
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment