Monday, 20 March 2017

Deluge loop sampling - Using drum & midi tracks


I think this is the best way to sample a loop using the deluge.
It maintains length & tempo as your recording is perfectly matched with the deluge.
You will need to make 3 tracks. 


 Method :
1. make 2 tracks
    a) drum - gives the length & tempo
    b) midi track - plays the synth (add your midi notes into the deluge sequencer)

2. plug Audio out from synth ---> into line in of Deluge

3. make an audio / recording track
   a) press any track pad & press select
       display will show "audio1".
   b) press learn. & press the track again
       The display will show left(dot) or stereo (dot) etc
       The dot allows you to monitor
   c) press select

4.  press record button & check colour.
      want purple / magenta.

5. Press record

6. Press play

7. press "Audition" pad or "play" to stop


***** NOTE *********
If the deluge is just sending midi clock to a synth with its own internal sequencer
you still need a midi track on the deluge to trigger your external synth. It can be left empty of notes.
The rest of the steps are the same as above.


-------------------------------------------------------------------


Recording a second audio clip


---------------------------------------------------------------


Recording alternative loops
so we can play one or the other,... but not both at the same time.

Press record & change the audition pad colour to red.

--------------------------------------------------------------------------------------



Deluge & Moog fatty

No comments:

Post a Comment