Tuesday 16 July 2019

Shat-Noir Phaser - Build notes

These are some un-official build notes for the Non-linear Circuits Shat-noir Phaser
It's an eurorack module.

This module uses light dependent resistors (LDRs).
You can find other phasers using a similar idea: notably the Carlin, Compact Phasing A,
Morely Phaser and ADA final Phase.

You will need to build a light-proof box to house the LDRs and the central LED.


Links:
+ NLC Blog

Wiki

BOM




First components



---
" GL5516 LDRs you may need to adjust the caps to suit. GL5516’s on resistance is approx. 5k at 10 LUx, if your LDR is higher, use a lower value cap, say 4n7. If your LDR goes lower try a higher value cap, say 15nF-22nF" (andrew F)


--- I'm using eight 10uF caps
May need to experiment with these.
-------------------------------------------------------------------------------------------------------
"The 100R is part of the LED driver circuit; it should be considered the minimum value resistor to use. Feel free to experiment depending
upon your LED,"

I'll use a 100R.

 The Quad amplifiers





waiting for some parts .....To be continued................

pART  2 is here
https://djjondent.blogspot.com/2020/03/nlc-shat-noir-build-part-2.html

---------------------------------------------------------------------------------------------------
Click here to return to the NLC Build Index: http://djjondent.blogspot.com.au/2015/03/non-linear-circuits-ncl-index.html 


No comments:

Post a Comment