Thursday 30 July 2020

Roland TR-8 Drum machine - MIDI trigger - Arturia Keystep Pro

 Some experiments triggering the Roland TR 8 Drum machine with an Arturia Keystep Pro
These basic notes should still work with most midi sequencers.

I re installed the factory settings of the Key step pro to firmware ver 2.01
Without changing any midi settings the TR8 & Keystep worked fine.
 
 

 The TR-8's default MIDI channel is 10

The Keystep's drum sequencer default midi channel is also 10

There are 11 sounds on the TR-8
1. C2    : Bass Drum      (35,36)* 
2. C#2    : Rim Shot             (37)*
3. D2    : Snare Drum 1       (38,40)*
4. D#2    : Handclap - HC        (39)*
5. F#2    : Hi Hat Closed - CH     (42)*
6. G2    : Low Tom              (43)**
7. A#2   : Hi Hat Open -OH -     (46)*
8. B2    : Mid Tom               (47) *
9. C#3    : Crash Cymbal            (49)*
10. D3    : Hi Tom                   (50)**
11. D#3    : Ride Cymbal   (RC)   (51)*


If you use the custom drum map assignments in Arturia's  MIDI Control Centre you should be able
to trigger all the instruments of the Roland Tr-8

----------------------------------------------------

The Roland TR-08
has a very similar MIDI implimentation

It's MIDI notes are:

1. C2    : Bass Drum      (35,36)*
2. C#2    : Rim Shot             (37)*
3. D2    : Snare Drum       (38,40)
4. D#2    : Handclap - HC        (39)*
5. F#2    : Hi Hat Closed - CH     (42,44)*
6. G2    : Low Tom              (43)*
7. A#2   : Hi Hat Open -OH -     (46)*
8. B2    : Mid Tom               (47)*
9. C#3    : Cymbal            (49)*
10. D3    : Hi Tom                   (50)*
11. G#3    : cow bell (56) 
12:             High Conga (62)
13:             Mid Conga (63)
14:             LOW Conga (64)
15:              Maracas (70)
16:             Claves (75)

No comments:

Post a Comment