Some build pics
This is a super easy build. Recommended for a beginner.
I purchased a complete kit.
aLL the tricky surface mount components are already installed.
40 pin header first
WQP-PJ3410 jacks with round nut
LED switches next
LED switch (white) PB61303-BL5 (momentary) 4
LED switch (green) PB61303-BL6 (momentary) 8
The top 4 white switches first -- Sw1 to SW4
The lower 8 (green) switches
The red mark is -ve
I found that is the space between the two PCBs was too small, shorting can occur.
So make sure the gap is there.
Links
+ Greyscale Algorhythm - Firmware 2 (Polyrhythm)
Buildguide
https://grayscale.info/algorhythm/
Polyrhythm firmware - manual 2
Manual 1
-----------------------------------------------------------------------------------------------
For more Euro DIY builds click here:
http://djjondent.blogspot.com.au/2017/12/diy-index.html
-------------------------------------------------------------------------------------------------
No comments:
Post a Comment