This is part 3 of my build of the Choral Generator module from nonlinear circuits..
It's a BBD based triple chorus generator.
It is inspired by the Choral generator in the ARP Omni The earlier parts are here:
Life is one big experiment.
Nothing is guaranteed.
Headers to join the two PCbs
The toggle switches can be ON-ON or ON-OFF-ON. These select
positive or negative feedback, or off if using the ON-OFF-ON type.
The REGEN pot can simply be set to 0 if you don’t want feedback and
have used ON-ON switches.
I'll be using just On-On switches
The B100k pots - linear
The BBDs... finally arrived and they work
MN3207
"As is, a signal patched into in 1 will be fed thru all 3 BBDs and arrive
at out all, so the 3 BBDs operate in parallel as is done on the ARP Omni.
The best effect is to modulate them with a 3 phase signal"
Alternatively, the three circuits can be used individually; patching to
the inputs will break the internal routing.
---------------------
No comments:
Post a Comment