External Sequencer
If you are using an external sequencer:
1. make sure MIDI RX ShortMessage is On.
The LED above pad 7 needs to be lit.
To do this, while holding down the MEMORY button, turn the volca fm on.
When you have finished, press the (REC) button.
2. set the MIDI channel
While holding down the MEMORY button, turn the volca fm on.
Keyboard buttons 1 to 16 correspond to the MIDI channels 1 to 16.
Press the button that corresponds to the desired channel, and the LED
below the keyboard button will light up.
When you have finished, press the (REC) button.
3. make sure you clear the pattern stored in the Volca, otherwise this will play when
you start the external sequencer.
----------------------------------------------------------------------------
Internal Sequencer
The Volca FM comes with 16 default sequences
To select a default sequence press:
[Memory] & [1-12 touch pad]
To erase (clear) whats in the memory of that sequence press
[func] + [16 - All]
All sequence data will be erased.
or press
[func] + [Act step]
All values in the active step will be deleted.
------------------------
To rec something:
press [play] + [rec]
play your tune.
To save to memory press
[func] + [memory]
This is the save-ready condition.
save the currently selected program number and sequence
to your chosen memory slot.
If you turn the volca off / on, your settings should still be in memory
No comments:
Post a Comment