These are my build notes for the Plinky Synth expander.
The Plinky synth is an 8 voice, polyphonic touch synth.
I'm building the expander for a friend.
Links
This is the 4HP expander (not the 2HP version).
The LEDs are pre soldered.
as are most of the components.
I soldered in the Jacks 1st.
There are 2 green ones for the MIDI ... they go above the USB connector (at the top of the PCB).
This 8 pin header connects the two boards.
solder it next
there is a 10pin header... euro power?
Not sure if this is needed if you are powering from the Plinky.
i soldered it in anyway.
The 16 pin header connects to the plinky
Some final pics.
A really easy build!
No comments:
Post a Comment