Cairns to Darwin - Bus trip - Day 1

 

DAY 1 - CAIRNS TO CROYDON

Travel through the Atherton Tablelands
* Take a 2 hour guided rainforest walk and a swim at a beautiful waterfall in the World Heritage Woorooneran National Park
* Mt Surprise
* Sunset
* Overnight air-conditioned multi-share accommodation Club Hotel, Croydon

 

 DAY 2 - CROYDON TO MT. ISA

*  Travel from Croydon to Normanton
* Normanton, where the largest salt water crocodile in the world was caught
* Travel through the "Channel Country"
* Free time in Mt Isa
* Enjoy a great meal and air-conditioned multi- share accommodation in Mt Isa

DAY 3 - MT. ISA TO CAPE CRAWFORD

* Journey into the Northern Territory today
* Keep an eye our for the ever present wildlife in this remote region
* Travel through the Barkly Tablelands
* Overnight accommodation at the Heart Break Hotel

DAY 4 - CAPE CRAWFORD TO Darwin

* Historic Daly Waters
* Bitter Springs for a swim at this significant aboriginal site
* Adelaide River
* Arrive Darwin for end of tour dinner

 

-------------------------------------------------------------------------------------------------------

The first leg, Cairns to Croydon is a 524 Km drive. and non stop, will take just over 6 hours.

 

 

 

 

Cairns to Millstream Falls National Park is a 1h 47 min drive (121km)

The falls flow over the edge of a columnar basalt lava flow, a legacy of the Atherton Tableland's volcanic past.

Overnight accommodation Club Hotel, CROYDON

NLC Phase/Flange 329 - Build Notes

These are my build notes for the Nonlinearcircuits eurorack version of the Aries 329 Phase Flange.
"Circuit is based on the Aries 329 phase/Flange, which is not the same as but shares some similarities with the Arp Quadra phaser and the Tau pipe Phaser. This version is nearly all smd and uses BCM847 matched transistors."


The old Aries brochure:

Some pics of the NLC panel & virgin PCBs

 Andrew supplied this board with the matched 847s already soldered onto the PCB.

Some NLC words of wisdom.

...

Eat your Makeup is a short film by filmmaker John Waters starring Divine, Mary Vivian Pearce, David Lochary, and Maelcum Soul. (1968)

First solder the ICs.

....

This row is of the 22nf caps. Don't use cheap ones.

Install the rest of the SMDs

It's time for the JFETs

JFETs can be either N or P channel.

The BOM specifies either a J108 or J 112. Both are N-channel.

The module needs two of these matched FETs.

G= gate, S= source, D= drain.

A voltage at the gate controls the channel resistance (between the S & D).

 Andrew reckons that you do not need to match them to 1μV. Just buy a batch of at least 10 or so and find the 2 closest to each other.  Maybe with in a few mV is okay. ??

I purchased a batch of J112s from Mouser and tested them using my Atlas DCA Pro.

Its a wonderful device which will make your job so much easier.

It's important to match the FETs as closely as possible. In my batch of 12 the results varied greatly.
I tested for VGSoff, Idss, VGSon in that order.

If you can get VGSoff very close and Idss in the ballpark, you should be ok.

You can see my full test results here:
http://djjondent.blogspot.com.au/2016/10/all-about-jfets-matching-for.html

There was a huge variation in results from just twelve J112s.

Maybe I'll get a batch of 20 to 30 next time to get closer matches

Today I'll go with 1 & 3

1. Vsg (off) = -2.97V
    Idss = 0.51v
    Vsg (on) = -2.04V

3. Vsg (off) = -2.98V
    Idss = 0.51v
    Vsg (on) = -2.05V

Main components are in.
Now its time for the jacks, switches & pots.

This is what the final module looks like:

Calibration is very important.
When I first turned the phaser on I was confronted with a loud continuous screech.
Adjustment of the trimpots eliminated this problem.

The main one is the 50K pot near the phase jack.
It also controls the amt of clipping at the outputs. A lot depends on the FETs chosen
Check out Andrew's NLC build notes for further info regarding calibration.


 Links:
1. Muffs
2. NLC Blog
3. NLC Build notes
4. NLC Blog 2
5. Retrosynth Ads blog
6. Original aries schematics for the phase-flanger
7. Muffs - NLC 2016 modules

Queensland - Barrington Tops , Cape Tribulation

 Some pics from way back (2003)

 

For more travel postcards click here:

http://djjondent.blogspot.com.au/2015/03/travel-postcards-index-my-travel.html