Wednesday 26 December 2018

Bastl Grandpa sampler module - adding samples

The Grandpa uses a microSD card which can be formatted using a standard windows computer.
I'm using windows 10
The format is Fat 32

From the manual:
 
"The files on the SD card need to be in the root directory and have specific names e.g.: P0.wav -P9.wav, PA.wav -PZ.wav etc. The first letter of the name has to be a capital P and second letter 0-9 or A-Z (also capital). "
 
I used Audacity to make my samples compatable with the Grandpa. It's a free piece of software  



 Samples have to be 22050hz, 16bit, mono wav files. (they can also be 44.1khz, but the sample rate will not allow pitch up then). 
 
 "You can remove the card from the device without powering it off. When you put the card back in hold the UP and DOWN buttons together for 2 seconds to reboot." ... from the manual

No comments:

Post a Comment