This is a very old controller.
The first setup Fader 0
The faders are set CC 0 to CC 7
The scene & midi channel is 1
Don't forget to save your settings correctly.
Use "Write Scene Data".
Don't forget to "Receive scene data" each time you reconnect
the nano to your PC.
--------------------------------------------------------
Sequencer A i 1-8
Midi channel 15
CCs : 0 to 7
Ive picked scene 2 for this sequencer
The CV output exits from jack 1 of the FH-1
The clock goes into the X input of the FH-1
---------------------------
This is sequencer B i Quantized 1-8
I've picked scene 3 for this.
Midi channel is 16
CCs are 96 to 103
The CV output exits from jack 1 & 5 of the FH-1
Pitch is from the 1st jack.
I suspect gates or triggers are exiting from jack 5
The clock goes into the X input of the FH-1
No comments:
Post a Comment