Patch notes using the MakeNoise 0-Ctrl.
The zero-control seems to be really good for controlling the ARP2500.
The +8V gates seem to be fine for triggering the 2500's EGs
The Pitch CV is OK too.
The ARP 2500's sequencer is the master clock.
It's clocking the 0-control.
The 0-ctrl's pitch is controlling the pitch of the 1023 VCO
The 1033 EG is triggered from the 0-ctrl.(I've used its gate inputs).
EG left is triggered from CV (strength channel).
EG right is triggered from #6 gate out
To trigger the gate, the strength knobs need to be fully clockwise.
When the 0-control is receiving an external clock, the time knobs don't
influence the step time anymore, but they are still outputting a CV.
This can be used to control things ... like trigger the 1033 envelope.
Both the 1033 & 1046 EG modules work well with the 0-ctrl.
Possible combinations:
Use "strength" to control one EG and "time" to control the second.
If there are 4 EGs, then use the individual gate outputs.
Of course the 1027 sequencer can also make more gates.
Links
No comments:
Post a Comment