mAKEnOISE - 0 cONTROL - bASIC pATCHES

Some very basic beginner patches ... just got the 0-control

Basic pATCH          1

to trigger the 0-coast you have to plug a gate/ envelope into either the gate or dynamic inputs of the 0-coast.

The picture above has a gate from the o-control  keyboard triggering the gate of the 0-coast

Use the gates/envelopes coming from the "keyboard" or "strength" of the 0-control.

.....

The interrupt function is interesting.

When Interrupt is ON :you can force the 0-CTRL to any step by touching the corresponding touchplate. 

When Interrupt is OFF, you can generate touch CV and touch gates without interrupting the 

clocked sequence.

The Clock

The Clock Input obviously is how you sync the 0-CTRL to another device.

Standard Euro pulses work fine.

The Clock Output is more complex as
it contains both internal and external clocks. Its affected by the Time parameter.

Using both internal and external clocks at the same time will create unique rhythms 

 

Direction

Apart from the touch plate,

Direction is voltaged controlled.

It has its own jack

pATCH 2

Below is a gate from the keyboard triggering the dynamics input

Last video:

Showing the different types of effects from the 4 types of Gate/envelopes

1. Pressure CV Output.
    Outputs CV according to amount of pressure applied to Step Touchplate(s). 0-5V.
2.Touch Gate Output.
   Outputs Gate signal when one or more Step Touchplate is being touched. 0V or 8V.
3.Dynamic Gate Output.
   Outputs Dynamic Gate Signal based on Strength and Time of current Step. 0-8V.
4.Dynamic Envelope Output. Outputs Dynamic Envelope based on Strength
   and Time of current Step. 0-8V.

..

 

 

+ 0-Coast - Basic Notes

+ 0-coast/0-control - Patches 2  

+ 0-control / 0-coast Patches 3