Wednesday 3 June 2020

Moog, Korg & Yamaha trigger CABLE V-trig to S-trig


Some pics for making a S-trig to V-trig cable.
Useful is you don't have a Moog 961 conversion module
 + 961 INTERFACE 


tHIS  first cable uses two 1/4 inch jacks.
To convert V-trigs from a 960 sequencer to S-Trigs.

It will also work well to convert a V-trigger from a Eurorack clock (for example) to a S-trig.

This cable is also compatible with old Korg (eg MS 20) & Yamaha synths


 Just 3 components:
10K resistor
1N4148 diode
2N3904 transistor


 Bluetack is a easy way to hold the components together while soldering.

Prevent shorts. Insulate !

 



If you are triggering a KORG SQ-10 sequencer, the sequence mode switch
 must be in either of these two settings for the s-trigger to work.






Links


No comments:

Post a Comment