This is part 2 of my build notes for the CA module
This is the build so far
Trannies next
There are 16 x BC 847s
Finally got the 072 op-amps on.
Final caps and resistors
L4148 diodes next
Rectifiers to prevent accidental damage if the module is plugged in backwards
Headers,
Lots of jacks ..24
....
The CA is really beautiful to behold. The visual patterns are hypnotic.
Plus I like that it outputs both CVs and gates.
Use a quantiser if you need precise CV values.
....
The clock input was a bit fussy.
Seems to prefer a square wave.
The CA works really well with the NLC 4seq
The 4seq has a clock divider.
The first division was patched into the CAs clock input.
The other divisions into the seed inputs.
The other module I like to use this with is a sequential switch.
If you patch the gate outs through the switch, you can get lots of variation
Links
+ BOM
+ Wiki
+ NLC blog
No comments:
Post a Comment