Korg wavestate - Making new set lists and populating them

Set Lists allow you to access quickly up to 64 presets" or performances.

There are 4 banks of 16 buttons.

Part A

The easiest way to add a new set list  slot is with the wavestate editor.

right click and open the set list editor

You will see a page like this:

--------------------------------------------------------------------------------

Part B

Now you need to load that new slot into the wavestate's memory.

Press Utility

You will see on the display the "System Setup"

The first line is the set list.

Use the encoder to scroll through your list of "set Lists"

Hit enter to load into memory.

---------------------------------------------------------------------------------------------------

Part C

Now you need to populate the new slots.

Start with Bank A, slot 1.

1. Select the Performance that you'd like to assign.

2. Press the SET LIST button, so that it is lit.

3. Hold WRITE and press the Slot to which you'd like to save

    (A1 in this example).

 You will see the Write page appearing on the display.

 Slot A1 is already selected. 

To change the Slot, press another button.

4. Press WRITE, 

 The display will warn you that you are about to overwrite the slot.

5. Press ENTER to confirm.

t