AKAI Force - MIDI clock

 The setup for MIDI clock.

I'm sending midi clock from a AKAI Force to a Korg SQ-64 sequencer.

Both the sq64 and the FORCE use the same MIDI system.

MIDI A

+ Midi/DIN  to TRS 3.5mm

So you can connect them with a simple 3.5 stereo cable.

A 5 pin DIN isn't needed.

The KORG setup is simple.

Press GLOBAL and set the clock source to MIDI

The FORCE also needs to be setup.

1. MENU

2. Go to the gear icon

3. MIDI/SYNC

4. Enter Matrix/session view

    You dont need to load or start playing any clips.

   Just press the PLAY transport button on the force.

   Make sure that the play button is also pressed on     the SQ64.

   The SQ64 should now be running in sync with         the force.

You can now start playing clips etc etc