Loading samples - Browse shortcut - waveform view

Deluge File Browser, Loading Samples, Browse shortcut, Waveform View

There are two ways to do this on the Synthstrom Deluge:

Method 1
1. Go to Clip/track View
2. SHIFT + Browse (shortcut pad)
3. Use the SELECT knob to navigate to the folder containing the sample
     [BACK / UNDO] will jump back, etc
5. Press the SELECT knob to load the sample
6. Press the Audition keys to play.
    you can choose different pitches as you play higher audition keys.

Method 2
1. Press Shift & Kit
    The file browser is immediately entered.
    You can browse the SAMPLES folder by turning the select knob
2. Pressing  the select knob will enter the folder or load the sample
3. [BACK / UNDO] will jump back, etc
4. After you load your sample you will be returned to track/clip view.

To add more samples to an existing kit.
1.Hold down the Audition pad (on an unoccupied row) and press Load.
2. Press Select
3. Repeat

Waveform view
1 Shift + START (shortcut)
   You should see the waveform with start and end points.
2. You can play it by pressing the Audition Keys.
3. Start = Green
    END = Red
4. Pressing each will cause it to start flashing. You can move the start and end points.
5. You can zoom in using the left/right knob (hold down & turn) to increase the resolution.

Setting the start and end loop points.
1. Hold the start line with one finger and touch the new loop point with another finger
2. Do the same for the end point
3. Start = blue
     end = purple
4. You can zoom in using the left/right knob (hold down & turn) to increase the resolution.

Links
+ Synthstrom - official youtube

---------------------------------------------
Note:
This post covers the deluge with firmware V3.0
-------------------------------------------------------