Saturday, 30 December 2017

Moog Mother 32 - sequencer - recording your first pattern using keyboard mode

This uses KB - keyboard - mode
 
1.  press Shift + KB to enter KB mode

2. Choose a memory slot to store your new pattern.
    There are 64 pattern slots. These are stored in bank and pattern memory cells
    To pick a bank press SHIFT + PATTERN (BANK) and navigate with  the KB/STEP buttons.
    There are 8 banks


    To pick a pattern slot just press PATTERN (BANK) and navigate with  the KB/STEP buttons.
     There are 8 patterns in each bank
  
 2a.  Now Erase the previous pattern in the memory slot chosen.
        Press reset + shift + pattern (at the same time)
        Now when you press the RUN button, you should hear a single note on the first step.


3. Now you can make your first recording.
   Hold SHIFT + RUN at the same time.
   (you will see the first step start to blink.)
 

4. enter the notes using the keyboard buttons & the HOLD/REST button.


5. To stop record mode press the RUN/STOP button



 6.  To run the sequence, press the RUN/Stop button


7. To stop the sequence Press the run/stop  button


8.  prepare to Save the pattern
     Press Shift +  RUN/Stop for 1 second
    You will see a LED flash green. This indicates where the pattern will be saved.
    if you want to change the location use the left/right arrows (marked in green).


9. Save the pattern
    Press Shift +  RUN/Stop

No comments:

Post a Comment