Utilities are pretty boring, but necessary.
Over the years Ive struggled to find ways to clock everything that I have.
Is it possible that one device can to it all ???
Probably not, but you can build a case with the modules to do it all.
I think I finally have it.
The trigger, drum modules and compressor arent necessary, but they are useful to have and certainly do
make the case even more handy.
The main clock source is the cyclic slew 1U.
The Synthrotec CVGT1 does all the Buchla / Euro conversions.
Both control voltages, triggers and gates.
We need a clock divider/multiplier (2hp), a CV sequencer (Pico).
The mutant brain allows me to trigger drums with MIDI
The Disting is a mark 1. Its enough.
I can clock my ARP 2500 easily with a gate from the Synthrotec.
I needed to make a conversion cable -- on one end is the 6.5 mm jack which plugs into the clock input of the ARP sequencer.
The other end of the cable has two ends... a banana ground jack & a banana tip jack.
These plug into your CVGT1 ground & gate outputs
Works flawlessly
You can also clock old Moog, Korg & Yamaha gear which needs V-Trig to S-trig conversion.
You need to make a cable for this,
Some more pics
Links
No comments:
Post a Comment