Bastl Grandpa - eurorack sampler - build

Some pics of my Grandpa eurorack module build.
This is a sampler. Love the wooden panel.

 These aren't really build notes. See Bastl's official site for those.
http://www.bastl-instruments.com/grandpa-assembly/

 Though I hope some extra pics of my attempt to assemble it will help a bit more.

I usually put the IC sockets first then the resistors, etc etc.

 tHERE are 2 PCBs.

The upper board: Holds the jacks, pots, LED etc

..

A small mistake here. I soldered the LED display too close to the PCB.

It has long legs for a reason... so it can sit up against the panel.

You can still view the LED easily even if you did solder it against the PCB, but it will be even clearer if do.

tHE tricky bit .. soldering the SD card.

----------------------
Some pics from my Second build of the Grandpa.
THIS is version 1.2

The RGB LED.

 i soldered the SD card at the end.

-----------------------------------------------------------------------------------------------
For more Euro DIY builds click here:
http://djjondent.blogspot.com.au/2017/12/diy-index.html
-------------------------------------------------------------------------------------------------