Thursday, 6 August 2020

MFOS Bi-polar Power supply

This is a excellent PSU


i'VE built an earlier one & it works well.



It uses LM78XX/LM79XX or LM78LXX/LM79LXX regulators
That is, it uses an AC output wall wart.
 DO NOT USE A DC OUTPUT WALL WART.




These are the parts needed:
1  LM7812 +12V Voltage Regulator  LM7812  U1  
1  LM7912 Voltage Regulator  LM7912  U2  
2  Resistor 1/4 Watt 5%  2.4K  R1, R2  
6  1N4004 General Purpose Rectifier  1N4004  CR1, CR2, CR3, CR6, CR4, CR5  
6  Capacitor Electrolytic  3300uF  C1, C2, C3, C6, C7, C8  
4  Tantalum Electro (35V)  1uF  C4, C5, C9, C10  
1  9 to 12 VAC Output Wall Wart  12VAC Output    
1  Optional SPST Switch  SPST    




Tantalum capacitors -- they are polarized.








Links:
http://musicfromouterspace.com/analogsynth_new/WALLWARTSUPPLY/WALLWARTSUPPLY.php

-----------------------------------------------------------------------------------------------
For more Euro DIY builds click here:
http://djjondent.blogspot.com.au/2017/12/diy-index.html
------------------------------------------------------------------------------------------------- 

No comments:

Post a Comment