Monday, 12 February 2024

Kareishuu - NLC build notes - part 2

This is  Part 2 of my build notes for the Kareishuu VCO
Part 1 is here:
.....


Links
BOM
Wiki
































Parts
Tayda
BC857 1 PNP, sot23-3

1N400x or S1JL 
1N400x (x = 1, 2, 3. 4) Power diodes are for Reverse voltage protection - Mouser
Part No: 821-S1JL. Any similar rectifier with at least 1A rating should be okay,
such as 1N4001, 1N4002, 1N4004. Get these sizes; SOD-123 or sub-SMA (DO-214 is
too big, so avoid)










LM13700 2 SOIC

TL072 x 4 SOIC Tayda: A-1136

LL4148 diodes 4 SOD-80 Mouser Part No: 512-LL4148



























BCM857DS 1 PNP, SOT23-6 or SOT457 Mouser: 771-BCM857DS-T/R
Mount the 1k tempco resistor over the BCM857 so they are in contact (1kT on
PCB). Once the VCO is tested and working, add a little heatsink paste so they
are thermally in sync (!). If you don’t care about 1V/oct tracking just use a
regular 1k resistor. 

to be continued......

-----------------------------------------------------------------------------------
You can find more NLC builds here.
--------------------------------------------------------------------------------------

No comments:

Post a Comment