The Seiko NH35 (also known as the NH35A) is an automatic, self-winding mechanical watch movement produced by Time Module Inc. (TMI), a subsidiary of Seiko Instruments Inc. (SII). It is widely considered the ultimate workhorse movement of the affordable and microbrand watch market, famous for powering millions of watches and serving as the go-to engine for custom watch builders. [1, 2, 3, 4]
Core Specifications
- Movement Type: Automatic, self-winding mechanical (with manual hand-winding capability)
- Jewels: 24 synthetic jewels (to reduce friction on moving parts)
- Frequency / Beat Rate: 21,600 vibrations per hour (vph) or 3 Hz
- Power Reserve: Approximately 41 hours when fully wound
- Winding Direction: Bi-directional winding using Seiko's "Magic Lever" system
- Hacking: Yes (the second hand stops when the crown is pulled out to the time-setting position)
- Hand-Winding: Yes (clockwise rotation)
- Date Complication: Yes, with a quick-set date function (commonly positioned at 3 o'clock, though dial configurations vary)
- Shock System: Diashock (Seiko's proprietary shock-protection system for the balance staff)
- Factory Accuracy Rating: -20 to +40 seconds per day
Why It Is So Popular
- The Modder's Favorite: The NH35 is the undisputed king of watch modding ("SeikoMods"). Because loose movements are inexpensive (typically selling for $40 to $80 USD standalone) and compatible with a massive ecosystem of aftermarket dials, hands, cases, and crystals, hobbyists can easily build or repair custom watches. [1, 2]
- Reliability & "Drop-In" Serviceability: It is an unbranded, commercial version of Seiko's internal 4R35 movement. It is built for ruggedness. When an NH35 eventually wears out after years of hard use, watchmakers often find it cheaper and easier to drop in a brand-new replacement movement rather than spending hours servicing and rebuilding the old one. [1, 2, 3]
Operating Tips
- Setting the Time and Date: Pull the crown out one click to quick-set the date (turning clockwise), and pull it out a second click to hack and set the time. Avoid changing the date manually between 9:00 PM and 3:00 MB/AM, as the movement's internal gears are already engaged in changing the date automatically. [1]
- Winding: If the watch has stopped, giving the crown about 30 to 40 clockwise turns will jumpstart the mainspring and get it running before you strap it on your wrist
............
.............
.
No comments:
Post a Comment