Step Edit - Electribe 2 (blue/grey)

 This is the method for editing individual steps in a pattern.

These are a bit like the per step parameter locks you will find on devices like

Electron synths

 

There are 4 types of edit available:

1. STEP Number

2. Note

3. Gate

4. Velocity

 

To enter STEP EDIT mode press

Menu/enter

Use the <    > till you get to STEP EDIT 

STEP EDIT is 24/28

 

 -------------------------------------------------

1. STEP Number

This Selects the step that you'll edit.

Range : . [1.01... 4.16]

 

Either turn the main value knob 

or press the target step (the 1-4 buttons select the bar)

It will be displayed like so:

Step : 1 : 01

1= first bar

01= first step 

 

----------------------------------------

 

2. Note

Specifies the note number of the target step

Range: {C-1...G 09]

Default : C 04

 You can record up to four note numbers in each target step.

 

-------------------------------------

 

3. GATE TIME

 This is the length of each step. 

For example, if the gate time is "96," the duration of the note is exactly as long as a single step.

 

Range:  [ 00...96, TIE]

 

If you specify "TIE," 

the oscillator, EG, and modulation are not retriggered if the next step has the same note 

-----------------------

 

4. Velocity

This is the strength of a note.

Range: [001...127]