Monday, 14 November 2016

ST 1902

The Seagull ST1902 (also designated as the TY1902) is an affordable, manual-wind mechanical chronograph watch movement manufactured by the Sea-Gull Group in China. [1, 2]
Origins and History
  • Swiss Venus 175 Heritage: The movement is directly derived from the classic Swiss Venus 175 column-wheel chronograph. [1, 2]
  • Tianjin Acquisition: In 1961, the Tianjin Watch Factory (later known as Sea-Gull) acquired the original machinery, tooling, and blueprints from Venus to produce military chronographs for the Chinese Air Force. [1, 2, 3]
  • Modern Production: Sea-Gull revived and updated the design using modern CNC machining and increased jewel counts, making mechanical column-wheel chronographs accessible at a fraction of the cost of Swiss alternatives. [1, 2, 3]
Key Specifications
  • Type: Mechanical chronograph, manual-wind (hand-windable, non-automatic)
  • Based On: Venus 175
  • Diameter & Height: 31.3mm (13.75 lignes) diameter; 6.25mm height
  • Jewels: 22 jewels
  • Frequency: 21,600 vibrations per hour (vph) / 3 Hz
  • Power Reserve: Approximately 42 to 45 hours
  • Chronograph System: Column wheel (horizontal clutch)
  • Shock Protection: Incabloc
  • Hacking: No (seconds hand does not stop when setting time) [1, 2, 3, 4]
Subdial Layout & ST1902 Specifics
Unlike its sibling the ST1901 (which features a 30-minute chronograph subdial and a running seconds subdial), the ST1902 uses a two-subdial configuration with a distinct twist: [1, 2]
  • 9:00 Subdial: Running seconds hand.
  • 3:00 Subdial: 30-minute chronograph totalizer.
  • 6:00 Subdial: A 12-hour hand synchronized directly to the main central hour hand (it acts as a 12-hour time display, not a 12-hour chronograph hour counter). [1]
Performance and Reliability
  • Pros: Offers a genuine column-wheel mechanical chronograph experience with a transparent caseback view (visible brass gears, blued screws, and ruby jewels) at an entry-level price point (replacement movements cost roughly $110 USD). [1, 2, 3]
  • Cons / Watchmaker Notes: Because it is a budget mechanical movement, finishing tolerances can vary, and the delicate column-wheel and lever mechanisms can occasionally fall out of alignment if handled or reset roughly while running. Proper operation requires stopping the chronograph before resetting. [1, 2, 3, 4]

 ...................


.............

No comments:

Post a Comment