Erica Synths - Midi to Trigger

This is a fantastic module.

Easy to program.

I use it mainly with my Keystep Pro.

This has a default setting which outputs drum triggers via MIDI on channel 10.

(this can of course be changed).

To program the Erica module set the MIDI channel first.

1. Push & hold the PROG button while powering on the modular synth.

2. press a note on the keyboard.

    If your sequencer uses channel 1 press C

    For channel 2, press C#

    In my case, as I want channel 10, I press A

3. Push the PROG button again for 2secs

    Trigger 1 LED will go on.

4. Push the key you want to assign to trigger 1.

5. Trigger 2 LED should now light up

6. Push the key you want to assign to LED 2

7. LED 3 should now light up.

8. Repeat till you have programmed all the triggers.

 

Enjoy