Wednesday 28 November 2018

LZX Castle - shift register patches

Just experimenting with the LZX Castle shift register... module 110
Some quick patch notes ...............

..



The module has three inputs. Clock, data & reset.

This is my first patch ... really basic.

Lumen from V cortex ------> input of ADC
Data out from the ADC ----> data in of the Shift Register
Clock is from the VCO clock
Reset - use a second oscillator... eg prismatic ray or a sequencer

There are 4 outs.
I plugged three into the V Cortex (no particular order).
----
Thanks to Chris for the following patch:
"put a ramp shape or camera input in to the DATA input. clock vco to CLK. take d0 out to your monitor. note the position on the screen. take d1 and it should be one clock cycle to the right from d0. etc with d2 and d3."

I tried a version of this:
i took the lumen out (from the VC ) into the data input of the shift register.
....
patch 2


----------------------------------------------------------------------
Video Index page

2 comments:

  1. shift register: put a ramp shape or camera input in to the DATA input. clock vco to CLK. take d0 out to your monitor. note the position on the screen. take d1 and it should be one clock cycle to the right from d0. etc with d2 and d3.

    ReplyDelete
  2. Cheers Chris,
    I'll try this patch tonight.
    Jono

    ReplyDelete